Providing Customer Peace of Mind
Call Us: 1-717-263-9237

Multi-Door Access Control

 Access control is the process of determining individual access to certain doors or areas.  These can be restricted also based upon the time of day and whether only one form or multiple forms of authentification are required.

We offer several levels of access control equipment.  Are you looking to limit access to members of a club, church, or organization?  No reason to spend tons of money on sophisticated equipment if you really don’t need it.  We can offer a solution to fit any budget.  On the other hand, do you need really strict and secure access, no problem

As corny as it sounds, we can handle any installation, no matter how small or how large.  We have customers with 1 access control point and customers controlling over 400 access control points.


Securakey Access Control Systems

  • Clubs (VFW, Am Legion, Elks, Moose, F.O.E, etc)
  • Office Buildings
  • Apartment Complexes
  • Municipalities
  • Day Care Facilities


SK-NET™ Access Control Software is an easy-to-use Windows®-based program for managing SK-ACP control panels. Up to 200 doors in a location can be networked using a high-speed RS-485 twisted pair bus.

SK-NET™-MLD allows the creation of an unlimited number of locations and connection via dial-up modem or TCP/IP. Client/Server licenses are also available that permit software access from multiple workstations. SK-NET™-MLD software is also ideal for Managed Access Control, allowing dealers to remotely manage access control systems for multiple customer locations for a monthly service charge.

SK-NET™ also features video integration when used with Remote Eyes® Video Management from Odyssey Technologies. SK-NET-MLD Version 5.0 also includes fully integrated ID Badge printing capability software.


The SK-ACP Advanced Control Panel is a highly sophisticated, yet simple to use, two-door access control unit. The unit accepts readers that have a Wiegand output with almost any card technology. Each of the two doors controlled by the unit is completely independent of the other and is configured, programmed and viewed separately. Each door has a separate node address. Each door has two programmable inputs which may be programmed to function as a door open, remote inactive, door monitor, tamper, arming circuit, door unlock, or user defined input.

Each door has two outputs. One output is the relay that activates the door-operating device. The other output is programmable to activate under one of many possible alarm conditions, time zone or card violations.

As a stand alone, the unit may be programmed using a PC either locally or via a modem over standard phone lines. Transaction information is stored by the unit and may be downloaded to a PC or printer.


Secura Key offers SK-NET™ in a variety of specially-priced 2-door access control kits, which include the SK-NET basic software and manual, SK-ACP-LE control panel, power supply, two readers, and a PC cable. The e*ACCESS kits feature e*Tag® contactless smart card technology, and the SYSKITS feature Radio Key® proximity technology. The kits include everything you need to control access for two doors except for cabling and door locking devices.


Kantech Access Control System – KT-300

  • Hospitals
  • Nursing Homes
  • Government Buildings
  • Office Complexes
  • Municipalities
  • Apartment Complexes





The KT-300 is a two-reader networkable door controller. One controller supports up to two readers, installed on two separate doors or on a single door controlling both entry and exit. Each controller is linked to the others in the system using an RS-485 communication bus providing control for up to a million doors depending on the EntraPass Edition.


The KT-300 features flash memory for easy firmware updates. The controller’s firmware can be updated from any EntraPass workstation in just a few minutes. Flash memory saves time by allowing system updates from a PC without having to update each controller individually.


KT-300 detects the system’s communication speed (set by EntraPass) and assigns the controller’s address, eliminating the need to set up DIP switches or jumpers. KT-300 also provides trouble reporting, constantly supervising locking devices for short and open circuits to detect lock failures. It also monitors battery condition to alert the system of low battery/no battery status. All power outputs are individually protected against short circuits and surges by a self-resetting PTC.


The KT-300 can be expanded via Combus expansion modules allowing for relay, input and output modules, and an LCD time and date display.


LEDs provide important controller status and diagnostic information. The KT-300 has multiple LED indicators for: communication status, troubleshooting, network activity, power status and outputs activity.


The KT-300 can interface with an external intrusion alarm system. An authorized individual can arm or disarm the alarm system simply by presenting their card to a reader.


The KT-IP (IP controller module) provides affordable and secure LAN/WAN network connectivity for the KT-300 door controller. In this setup, the KT-300 is first connected to a VC-485 (RS-232/ RS-485 interface). Then the VC-485 is connected to the KT-IP (and both devices are powered by the KT-300). The KT-IP relays information between the KT-300 and the EntraPass Multi-Site Gateway. Features That Make a Difference:

Controls two readers and easily links to a network

Update firmware directly from system workstation

Fast operation, up to 115,200 baud

Ready to go, no DIP switches or jumpers to set

Interfaces with an external alarm system

Choice of 128K or 512K memory capacities

LEDs provide important controller status and diagnostic information


Kantech Access Control System – KT-400

  • Hospitals
  • Nursing Homes
  • Government Buildings
  • Office Complexes
  • Municipalities
  • Apartment Complexes







KT-400 is an Ethernet-ready four-door controller that provides 128-bit AES encrypted communication with the EntraPass system and is a highly secure solution for any security-conscious business. KT-400 can easily be integrated into an existing EntraPass system with other Kantech controllers (KT-100 and KT-300) or can provide the foundation for a brand new security installation. With an onboard Ethernet port, an external IP device is no longer required to connect to the network. The onboard port is dual-sensing, which means the system senses whether the connection is 10Base-T or 100Base-T, and adjusts automatically for faster connectivity. KT-400 manages network polling and communicates with the EntraPass Gateway only when an event has occurred. Communication integrity is ensured through a heartbeat signal which is sent at regular intervals to the EntraPass system. This asynchronous communication significantly reduces the amount of bandwidth required to manage the access control system over the network.


  • Supports four readers

  • Secure 128-bit AES encryption solution

  • 100,000 cards per controller and 20,000 stored events in stand-alone mode

  • Expansion flexibility – connect up to 256 inputs and 256 outputs

  • Full integration with DSC PowerSeries and MAXSYS alarm panels

  • LEDs provide important controller status and diagnostic information

  • Ethernet-Ready Encrypted 4-Door Controller

The KT-400 is a 4-door Ethernet-ready controller providing a secure (128-bit AES encryption) solution for any enterprise looking for the highest available security. It easily integrates into existing EntraPass

systems and with other Kantech controllers (KT-100, KT-200 and KT-300). The KT-400 can also provide the foundation – with the EntraPass system – for a brand new highly scalable security  installation.  An onboard Ethernet port ensures quick network connectivity and eliminates the need for an external Ethernet device.


The KT-400 allows connection to expansion modules in order to add inputs or to add outputs such as relays and drain outputs. Combining input and output expansion modules provides the flexibility to connect up to 256 inputs and 256 outputs.


LEDs provide important controller status and diagnostic information. The KT-400 has multiple LED status indicators for: troubleshooting, network activity, power status and outputs activity.


The auto-sensing 10/100Base-T onboard Ethernet port automatically selects compatible Ethernet  speeds to provide faster network connectivity. It eliminates the need to purchase an external Ethernet device, saving time and money. The KT-400 uses secure 128-bit AES encryption to communicate with the Gateway.

Contact Us

ATA Security Systems
150 Farm Credit Drive
Chambersburg, PA 17202

Fax: 717-263-8097

Monday-Friday 8am-5pm
Saturday-Sunday Closed